How Do You Use a Refrigerator for The First Time

Updated on April 18, 2022

When you buy a new refrigerator, you must wait at least two hours and up to twenty-four hours before putting food inside. You have to wait for the refrigerator to fully function before you can use it. As a result, the refrigerator will be able to perform at its best, as well as obtain the following benefits.

  • Precise Temperature Monitoring.
  • Water that has been properly chilled is what you’re looking at here.
  • The first stages in the ice-making process.

Let it stand 

Thinking about how long you need to ‘let it stand’ is an important first step.

Refrigerators and freezers contain a large amount of liquid that is utilised to maintain a cold interior temperature. It’s better to wait until everything has settled before plugging your appliance in during shipping.

Give it at least an hour before plugging it in if it was transported upright.

Turn it over and leave it for at least four hours if it was transported on its side.

Quick clean 

To ensure that it is safe to use, you should clean it before using it for the first time.

Using warm water and dishwashing liquid in each cavity is all that’s required; no more is required. Before reinstalling the compartments, make certain they are totally dry.

Choose the right position 

If your new appliance is going to be installed in your kitchen, you’ll need to make sure there’s enough room for air to circulate around it.

There should be at least 5mm of space around your fridge freezer, so try to arrange it in the middle of the room and avoid pushing it all the way back against the wall..

Turn It On

Plug it in and turn it on, and you’re ready to use your fridge freezer. This should be done at least a few hours before you intend to use the appliance, since it will require time to cool down.

Taking the time to follow the above instructions and properly install your new fridge freezer will ensure that it will last for many years to come.

How Long You Should Wait Before Switching On A New Refrigerator?

Consider how the refrigerator was carried to your location when we are contemplating a new appliance. Whether the refrigerator was brought upright or on its side, all of these factors must be considered and the appropriate measures made to prolong its lifespan.

Refrigerators have pipes that allow lubricant and gas to flow through them. Prior to turning on the refrigerator, make sure all of these pipes are in their right places. It takes around two hours for the refrigerator to come to temperature if it is delivered in a straight line.

It’s best to wait at least four hours if it was hauled on its side, so that the lubricant and gas can settle down. Some refrigerators, such as Whirlpool, might take up to 24 hours to power on.

How Long You Must Wait To Keep The Food Inside Your New Refrigerator?

After learning about the safety precautions, you can now use your new refrigerator for many years to come. Now, let’s get right to the point for which this piece was written.

Waiting a certain amount of time before putting food in your new refrigerator and why is this so critical

Your new refrigerator must be given a minimum of two hours to reach the precise temperature required for proper food preservation.

Samsung also provides this advise on its website. It was also mentioned that the rationale for switching off the refrigerator after two hours is to ensure that the refrigerator is functional or not. [page needed]

Before they may be turned on, some refrigerators require a minimum of 24 hours of storage time. This is primarily due to the refrigerator’s many features, such as its ice-making capability, which can take up to 24 hours to fill.

What Are The Drawbacks of Loading The Refrigerator Before two Hours?

The thermostat setting determines the average temperature of a refrigerator. The refrigerator is able to attain its maximum temperature in the allotted 2 hour time period.

As a result, it will take considerably longer for your food to cool and may put additional strain on your refrigerator, costing you money in the long run.

As a result, the food will not freeze well if it needs to be stored in a refrigerator.

This may also imply that the freezer’s maximum temperature is higher than the manufacturer’s recommended setting.


Let’s have a look at everything you need to remember from this course.

When transferring food from one refrigerator to another, you’ll need to be careful about how you do so in order to avoid deterioration.

If you’re transferring food from one refrigerator to another, you’ll want to maintain a relatively constant temperature.

There will be a need to promptly refrigerate any food that has been stored at a higher temperature in the old refrigerator.

Before putting food in the fridge, make sure you’ve noticed the position in which it was transported and given yourself the required amount of time.

Leave a Comment