How Do I Stop Condensation in My Fridge

Updated on April 16, 2022

The accumulation of condensation in your refrigerator is a source of concern. The same is true for exterior condensation. In both cases, food rotting and water damage are possible outcomes.

Humidity is the primary cause of condensation. Temperature changes, weather conditions, and energy-saving measures all have the potential to cause your fridge’s door to bead up. Refrigeration malfunction or poor food storage can lead to condensation on the inside of a refrigerator. Fixing these difficulties is often easy and quick.

What You’ll Need

We’ve included a number of fixes that don’t require any tools. But a few require basic tools or replacement parts that are easy to obtain. Everything you’ll need for our step-by-step guide is listed below.

  • A screwdriver with a flat head.
  • Replacement gasket for the refrigerator
  • Drainage hole chisel (or another mechanical drain cleaner)
  • Dehumidifier

Step-By-Step Guide to Fixing Fridge Condensation

1. Just Wait 

The first step is here. Simply wait it out as you sip on your favourite beverage or binge-watch your favourite show on TV. Really. It’s as simple as that.

It’s normal for our homes to have some condensation buildup. Neither your fridge nor your home are endangered by a modest amount of moisture that doesn’t persist very long.

As long as there isn’t much condensation and it goes away soon, you don’t need to do anything.

2. Check Your Energy-Saver Options

Smart, energy-saving features abound in today’s refrigerators. Consumers in the present day have a lot to gain from these features. You can save money and protect the environment at the same time with the help of these products. But one of these settings can lead to a buildup of condensation on your refrigerator.

Anti-sweat heaters in your refrigerator help to keep condensation to a minimum.

These anti-sweat heaters may not be on if your refrigerator is set to save energy.

Turn off your energy saver settings if you notice too much dampness building up in your home.

3. Give the Fridge Some Room

In most cases, we place the fridge against the wall, however this isn’t the optimum placement.

To keep your fridge cool and minimise condensation, it needs a steady flow of air around it. Get a few inches away from the wall if you’re seeing a lot of water on the outside of your fridge. This will allow more air to circulate around your refrigerator, making it more energy efficient. This will speed up the evaporation of the condensate.

4. Try a Dehumidifier 

Relative humidity is reduced in a room by using a dehumidifier. If you live in an area with a lot of humidity, you may want to consider installing a dehumidifier in your kitchen.

Using this method will help reduce the humidity in your refrigerator and keep it there. Condensation can build up quickly on refrigerators in humid climates. A dehumidifier might help prevent condensation on your refrigerator if it’s hot and muggy in your house. To keep your home free of mould and mildew, a dehumidifier is a must-have appliance. Everything works out in the end!

5. Let Hot Food Cool—Just a Little 

Adding a lot of hot food to your refrigerator at once might boost its temperature and cause humidity..

Large pots of hot food, in particular, can pose a risk of burns. Let the soup cool down a bit before putting it in the fridge if you just cooked a large stock pot full of steaming hot soup. Before putting it in the fridge, it doesn’t need to chill down to room temperature, but if it’s just out of the pot, you’ll want to wait a few minutes before doing so.

To keep your fridge from overheating, you can also use this method.

6. Don’t leave your fridge door open

Always make sure the seal on your refrigerator is tight before closing it.

If you leave the fridge door open, warm air will enter the appliance and cause condensation, just as if the seal were broken.

7. Keep your fridge straight

Has your fridge or freezer ever been checked to see if it’s fully upright or not?

If this is the case, you may be experiencing condensation in the appliance because of this.

It may not be able to drain properly if the fridge isn’t standing up straight, which might lead to a buildup of condensation.

8. Unclog the fridge drain

If you’ve observed that your refrigerator is holding more water than usual, there may be a problem with the drainage system.

Your fridge may not be able to drain water properly if your drain becomes clogged with loose food. This problem should be easily remedied by doing a thorough drain cleaning.

Condensation isn’t always the culprit when it comes to water pools in your refrigerator. Repair expertise will be needed if the defrosting mechanism in the appliance is malfunctioning.

9. Check for ice hockey build-up.

Your refrigerator’s back wall can become iced over from time to time. Overfilling the refrigerator can lead to this problem, which prevents air from moving about and keeps the appliance frost-free.

The refrigerator may not be able to drain water if ice has built up. De-icing the refrigerator by shutting it down and letting ice melt would be the only solution.

Before turning the refrigerator back on, it’s a good idea to check the drainage hole to make sure it’s clear.

Fixing Condensation Problems

You may notice water droplets on the back or ceiling of your refrigerator when you open the door for the first time in the morning.

If you want to keep condensation at bay, here are some tips:

  • Before storing food in the refrigerator, make sure it has reached room temp or has been cooled.
  • In the event that your refrigerator isn’t completely flat, water won’t be able to drain effectively. Adjust the height of your refrigerator by turning the front ground screws a few times.
  • Do you make sure the door closes properly and that the rubber gasket forms a perfect seal? Consider closing the door on a piece of newspaper as a test. It’s possible that the seal is loose and has to be replaced if you can easily remove it.
  • Make certain that the temperature in your refrigerator isn’t set too high (or too cold). It should be situated in the range of 0° to 5°.
  • After launching the refrigerator, close the door as quickly as possible. Condensation can occur if the door is left open, allowing warm air to enter.
  • The inside and outside of your refrigerator should be thoroughly sanitised. Make sure the door seals are making proper contact with the refrigerator by wiping them off with a damp cloth. Make sure your fridge is in peak condition by purchasing the WPro Fridge Care Kit
Leave a Comment